2 Inch Lift Kit | No Shock | Jeep Wrangler JL (2018-2026) | Zone Offroad

This configuration includes the coil spacers, bump stop extensions, and extended sway bar links only — no shocks are included. Designed to work with your existing factory or aftermarket shocks.

Overview

This 2-inch lift kit from Zone Offroad is designed specifically for the Jeep Wrangler JL (2018–2026) and is compatible with both Gas and Diesel models. Using JL-specific polyurethane coil spacers that mount on top of the factory coil springs, this kit provides additional lift while retaining the original ride quality and allowing clearance for tires up to 35 inches. Front and rear bump stop extensions are included to properly limit up travel, and extended-length front sway bar links correct the sway bar operating angle.

Note: See the Pre-Installation Check in the Instructions to verify fitment before beginning installation.

Features

• Front and rear urethane coil spacers provide 2 inches of lift while retaining factory handling characteristics
• Front and rear bump stop extensions to properly engage bump stops during hard compression
• Extended length front sway bar links to correct sway bar operating angle
• Allows clearance for tires up to 35 inches
• Compatible with both Gas and Diesel Wrangler JL models

Specifications

• Front Lift Method: Coil Spacer
• Front Lift Height: 2 inches
• Rear Lift Method: Coil Spacer
• Rear Lift Height: 2 inches

Installation

• Estimated Installation Time: 4.5 hours
• Installation Difficulty: Moderately Easy

Important Notes

• Will work on both Gas and Diesel models.
• See Pre-Installation Check in the Instructions to verify fitment.