Configured with Nitro Series shocks featuring a nitrogen-charged twin-tube design, 10-stage velocity-sensitive valving, dual-welded ends for increased strength, self-lubricating seals, internal floating piston (IFP), and a black powder coat finish on a 2-inch diameter steel body.
Overview
This 5.5 inch lift kit from Zone Offroad is designed for the Ram 2500 (2019–2026) 4WD Gas models. The kit includes everything needed for a complete lift, from full-length coil springs and radius arm drop brackets to steering correction and rear lift to level the stance. Clearance is provided for up to 37 inch tires.
Features
- High strength progressive rate front coil springs for improved ride quality on any terrain
- Radius arm drop brackets to correct caster and maintain suspension geometry
- HD track bar relocation bracket to correctly position the front axle under the truck
- Forged drop pitman arm to correct steering angles
- Front sway bar correction to maintain handling performance
- HD transmission crossmember and t-case indexing ring to correct front driveline angles
- Includes shocks (Nitro Series gas or FOX Adventure Series IFP gas) to improve ride and off-road performance
- Allows clearance for up to 37 inch tires
Specifications
- Front Lift Method: Coil Spring
- Front Lift Height: 5.5 inches
- Rear Lift Method: Coil Spring
- Rear Lift Height: 5 inches
- Shocks Included: Yes
Installation
- Estimated Time: 6 hours
- Difficulty: Difficult
- Tools Required: Standard Wrenches
Important Notes
- Will not fit rear air-ride equipped models.
- Kit designed for Gas models only.
- Does not fit Powerwagon models.
- Does not fit vehicles with a Manual Shift Transfer Case.
- Exhaust modification is required to clear the front driveshaft. Vehicle can be driven without the front driveshaft to an exhaust shop.
- Trucks equipped with a 2-piece rear driveshaft require carrier bearing shim kit D5406 (not included with kit).
Total Reviews (0)
Write the First Review!