6.5 Inch Lift Kit | Chevy Silverado & GMC Sierra 1500 (2007-2013) 4WD | Strut Spacer Front / Zone Nitro Rear Shocks | Zone Offroad

This configuration pairs an OE-style Strut Spacer front lift (6.5") with Zone Nitro Rear Shocks for 5" of rear lift. The crossmember and strut spacer front lift method maintains OE front struts while correcting lower control arm geometry.

• Nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• Self-lubricating seals
• Black powder coat finish
• 2-inch diameter steel body

Overview

This lift kit from Zone Offroad is designed to give the 2007–2013 Chevy Silverado and GMC Sierra 1500 4WD a more aggressive stance and improved off-road capability. The kit includes high-strength crossmembers, CNC machined steering knuckles, differential relocation brackets, Adventure Series upper control arms, and all hardware needed for a complete installation. It is available in multiple front and rear shock configurations to suit different ride quality and performance preferences, with front lift achieved via either Zone Nitro loaded struts or OE-style strut spacers, and rear lift via block and u-bolts.

Features

• Corrects suspension, steering, and driveline geometry for improved on-road handling and off-road performance
• Heavy-duty differential skid plate improves off-road protection
• High-strength, 1/4" steel construction crossmembers correct lower control arm geometry
• High-strength, CNC machined replacement steering knuckles improve strength while correcting steering angles
• Multi-point differential relocation brackets secure front differential for improved CV operating angles
• Adventure Series upper control arms improve strength and suspension geometry; provides clearance for up to 35" tires
• Rear lift block and longer u-bolts for easy installation and level stance
• Weld-in frame support plate for additional strength
• Proudly made in the USA

Installation

• Estimated Time: 8 hours
• Difficulty: Difficult

Important Notes

• Crew Cab / Add-A-Leaf: Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance.
• Fitment: All wheel drive models require front driveline modification. See installation instructions for more information.
• Fitment: Will NOT fit 2007 "Classic" models. If you have a 2007 Classic, see kits for comparable 1999–06 models.
• Fitment: Will NOT fit 2009–11 Two-Mode Hybrid models with Electronic Power Steering (EPS).
• Wheels / Tires: Factory 20" wheels CAN be reinstalled; Factory 17" and 18" wheels CANNOT be reinstalled. Check wheel clearance before and after mounting tires by turning the steering wheel through its full range of motion to make sure you're free from body or suspension interference.
• Wheels / Tires: To reduce trimming required, 20" wheels with 5.5–5.75" backspacing recommended. See installation instructions for more information.