3.5 Inch Lift Kit | Adventure Series | Ford Bronco Badlands (2021-2025) 2-Door | Zone Offroad

This kit is configured for the 2-Door Ford Bronco Badlands edition (2021–2025). Lifts the front 3.5" and rear 2.5" using strut spacers. Shocks are not included.

Overview

The Zone Offroad 3.5" Adventure Series lift kit is engineered specifically for the Ford Bronco Badlands edition (2021–2025). Building off the factory suspension geometry, the kit adds 2-piece strut spacers, Adventure Pro Series upper control arms, and all necessary hardware to complete the installation. The result is 3.5" of front lift and 2.5" of rear lift, providing clearance for 35"–37" tires while maintaining ride quality, handling, and on-road performance.

Features

• Maintains vehicle ride and handling performance while improving off-road capability
• 2-piece strut spacer design maintains ride quality without overextending suspension during down travel
• Adventure Pro Series upper control arms for improved strength, travel, and maintenance-free operation
• Lifts and levels the stance with clearance for oversized wheels and tires
• Designed for easy installation and manufactured in the USA
• Includes Factory Protection Plus warranty program

Specifications

• Front Lift Method: Strut Spacer
• Front Lift Height: 3.5"
• Rear Lift Method: Strut Spacer
• Rear Lift Height: 2.5"
• Lift Height Range: 2"–3.5"
• Shocks Included: No

Installation

• Estimated Time: 3–4 hours
• Difficulty: Moderate
• Tools Required: Basic hand tools

Important Notes

This kit is designed to lift the front of the vehicle 3.5" and rear 2.5". The CV axle nut may need to be loosened and tightened on the ground with the weight of the vehicle. Although 37" x 12.50" tires will fit at ride height, they will still contact the front body mount and possibly the rear inner fender through wheel travel and steering lock to lock. If running this tire size and using the full suspension travel, these areas must be addressed. Does not fit Bronco Sport models. Not compatible with HOSS 3.0 or Raptor models. Does not fit Sasquatch models.