4 Inch Suspension Lift Kit | 1993-1998 Jeep Grand Cherokee ZJ 4WD | w/ FOX 2.0 Adventure Series Shocks | Zone Offroad

Configured with FOX 2.0 Adventure Series shocks featuring a nitrogen-charged twin-tube design, 10-stage velocity-sensitive valving, dual-welded ends, self-lubricating seals, a 2-inch diameter steel body, and a black powder coat finish for enhanced durability and off-road performance.

Overview

This 4-inch suspension lift kit is designed for 4WD 1993–1998 Jeep Grand Cherokee (ZJ) models. It provides the ground clearance and wheel travel needed for off-road use while maintaining on-road handling. The kit allows fitment of up to 32-inch tires.

Features

• Bump stop extensions properly limit up-travel, protecting the vehicle
• Full-length replacement coil springs add ride height while maintaining ride quality
• Heavy-duty lower control arms improve strength and articulation while correcting caster
• Heavy-duty, extended-length sway bar links improve operating angle for reduced body roll
• Rear track bar bracket correctly positions the rear axle under the vehicle
• Transfer case drop kit included to correct rear driveline angle and allow use of the factory rear driveshaft

Specifications

• Front Lift Method: Coil Spring
• Front Lift Height: 4 inches
• Rear Lift Method: Coil Spring
• Rear Lift Height: 4 inches
• Shocks Included: Yes

Installation

• Estimated Installation Time: 5.5 hours
• Installation Difficulty: Moderate

Important Notes

CV Front Driveshaft: ZJs were manufactured with different types of driveshafts. If your vehicle is equipped with a factory CV style front driveshaft, an aftermarket U-joint style driveshaft will be required to eliminate driveline vibration. For help understanding this problem and to help find a solution, please contact customer support.

Fitment: V8 engine equipped models may not achieve stated lift height. If equipped with a V8 or other heavy aftermarket accessories such as a winch bumper, 3/4-inch front coil spacers are recommended to achieve additional front ride height. Add in configuration / checkout.