Click on image to zoom

BDS 6 Inch Lift Kit | Block Kit & Add-A-Leaf | FOX 2.0 Performance Series Rear Shocks | Chevy Silverado/GMC Sierra 1500 (2007-2013) 4WD

Suspension Kits

BDS176PSS
Pricing: $4,281.65
Qty:

Description

Rear lift is achieved via a Block Kit and Add-A-Leaf configuration. The 4-inch cast iron rear block replaces the factory 1-1/4-inch block, netting approximately 4.5 inches of rear lift to level the vehicle while maintaining factory payload weight ratings. Rear shocks are FOX 2.0 Performance Series units featuring a 2-inch impact-extruded aluminum body, an internal floating piston (IFP) monotube design, a large 5/8-inch hard chrome plated alloy steel shaft, and application-specific valving to maximize performance.

Overview

This BDS 6-inch lift kit is engineered for 2007–2013 Chevy Silverado and GMC Sierra 1500 4WD trucks, providing improved stance, ground clearance, and off-road capability with fitment for up to 35-inch tires. Up front, the kit uses full-length replacement strut shocks, high-arched 1/4-inch-thick steel crossmembers, multipiece differential relocation brackets, and heavy-duty skid plates. Steering geometry is corrected at the new ride height with CNC-machined ductile iron steering knuckles that work with factory tie rod ends to maintain steering angles and ESC system compatibility. Sway bar drops, bump stop extensions, brake line brackets, and CV spacers are included for a comprehensive front suspension lift. In the rear, the kit is available with either a lift block and add-a-leaf configuration or full Glide-Ride replacement leaf springs, paired with your choice of FOX rear shocks. A Factory Protection Plus drivetrain warranty is included.

Features

  • High-clearance crossmember design maximizes ground clearance; laser-cut, 1/4-inch-thick steel construction
  • Heavy-duty front skid plate system bolts together to form a rigid subframe with added off-road protection
  • CNC-machined ductile cast-iron steering knuckles correct steering geometry at the lifted ride height and maintain ESC system compliance
  • Multipoint differential relocation brackets secure the front axle and improve CV angles
  • Full-length replacement front strut shocks
  • Rear lift available as block kit with add-a-leaf or full Glide-Ride replacement leaf springs
  • FOX Performance Series IFP gas rear shocks or FOX 2.5 Performance Elite rear shocks (per selected variant)
  • FOX 2.5 Performance Elite front coilovers with Dual Speed Compression (DSC) adjuster for versatile, precise tuning
  • Sway bar drops, bump stop extensions, brake line brackets, and CV spacers included
  • Factory Protection Plus drivetrain warranty included
  • Fitment for up to 35-inch tires

Specifications

  • Lift Height: 6 inches
  • Front crossmembers: 1/4-inch-thick laser-cut steel
  • Steering knuckles: CNC-machined ductile cast iron
  • FOX 2.5 Performance Elite shocks: 2.5-inch impact-extruded aluminum body, 7/8-inch hard chrome plated heat-treated alloy steel shaft, external reservoir, DSC adjuster, fully serviceable; 1-year manufacturer's warranty
  • FOX 2.0 Performance Series shocks: 2-inch impact-extruded aluminum body, IFP monotube design, 5/8-inch hard chrome plated alloy steel shaft, application-specific valving, clear anodized finish; 1-year manufacturer's warranty
  • Rear block (block kit option): 4-inch cast iron block, replaces factory 1-1/4-inch block, nets approximately 4.5 inches of rear lift
  • Rear leaf springs (leaf spring option): Multi-leaf progressive design, maintains factory payload weight ratings, corrects pinion angles, reduces axle wrap
  • Recommended wheel backspacing: 5 to 5-3/4 inches (20-inch wheels)

Installation

  • Estimated Installation Time: 8 hours
  • Installation Difficulty: Difficult

Important Notes

  • This system will not fit 2007 Classic models.
  • Installation of rear leaf springs requires removal of the fuel tank.
  • Requires frame bracket modification.
  • 20-inch wheels with 5-inch to 5-3/4-inch backspacing recommended to reduce trimming.
  • Traction bars will not fit regular cab short box models.
  • Add BDS121651 Auxiliary Differential Support Bracket for AWD models. May also require front driveline modification.
  • Will not fit two-mode hybrid models with electronic power steering.
  • Stock 20-inch wheels can be re-installed only with factory tire size. Factory 17-inch and 18-inch wheels cannot be re-installed.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 269.9 lbs.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.