BDS 5.5 Inch Lift Kit w/ 4-Link | Ram 3500 w/ Rear Air Ride (2013-2018) 4WD Gas | FOX 2.0 Performance Series

Configured with FOX 2.0 Performance Series shocks front and rear. FOX 2.0 shocks feature a 2-inch impact extruded aluminum body, an internal floating piston (IFP) monotube design, a massive 5/8-inch hard chrome plated heat-treated alloy steel shaft, CNC machined 6061-T6 aluminum mounting ends, race-developed high-flow piston design, application-specific valving, and a long-lasting clear anodized finish.

Overview

BDS Suspension engineered this 5.5-inch lift kit with 4-Link conversion for 2013-2018 RAM 3500 gas-powered trucks equipped with factory rear air ride. Designed to improve stance, performance, and capability, this kit includes everything necessary to provide clearance for up to 37-inch tires. Up front, the kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, a forged drop pitman arm, a track bar bracket for steering correction, bump stops, brake line brackets, and precision-tuned shocks. In the rear, this kit utilizes a high-strength fabricated lift block, heavy-duty air bag spacers, longer u-bolts, and a matching set of shocks.

4-Link Conversion

The factory stamped steel radius arms are converted to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

A forged drop pitman arm minimizes the steering angle, paired with a heavy-duty track bar drop bracket to keep steering geometry in phase through suspension travel while recentering the front axle.

Features

• Heavy-duty 4-link improves strength, handling, and caster control
• Front high-strength progressive rate coil springs for ride quality on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 Nitro or FOX 2.0 Performance Series IFP gas shocks for improved ride and off-road performance
• High-strength fabricated lift block and heavy-duty air bag spacers in the rear
• Longer u-bolts included
• Clearance for up to 37-inch tires

Specifications

• Lift Height: 5.5 inches
• Fitment: 2013-2018 RAM 3500 4WD Gas w/ Factory Rear Air Ride
• 4-Link conversion brackets: 1/4-inch high-strength steel
• Coil springs: Full-length, gas-specific, progressive rate Pro-Ride

Installation

• Estimated Time: 8 hours
• Difficulty: Moderate
• Tools Required: Step Drill Bit, Drill / Bit Set, Pitman Arm Puller, Welding Equipment

Important Notes

• 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.
• The carrier bearing drop is necessary for models equipped with a two-piece rear drive shaft.
• Some vehicles may require a rear driveshaft spacer kit (p/n 122007) to maintain adequate rear driveshaft engagement.
• DRW models: fit inner wheel clearance to the upper u-bolt plate on 5.5–6-inch kits.