BDS Transfer Case Indexing Ring Kit | Manual Transmission | 2003-2013 Ram 2500 4WD

Overview

Prevent front driveline issues on your lifted 2003–2013 Ram 2500 4WD manual transmission truck with the BDS Transfer Case Indexing Ring Kit. At 6 inches of lift and above, indexing the transfer case is necessary to allow the front driveline to reconnect and eliminate vibrations. Designed for flange transmissions, this kit features optimal spline engagement and is dual-drilled to allow positioning for compatibility with a range of lift heights. The kit also includes a billet aluminum driveshaft spacer and all required hardware.

Features

• Indexing rings eliminate front driveline vibrations
• Proper clearance prevents cross-member interference
• Heavy duty steel construction for maximum strength
• Designed with optimal spline engagement to prevent transmission-to-transfer case damage
• Dual-drilled for compatibility with a range of lift heights
• Includes billet aluminum driveshaft spacer and all necessary hardware

Installation

• Estimated Installation Time: 3–4 hours

Important Notes

• 2003–2012 Ram 2500 Gas models will require modification to the front exhaust crossover pipe on the driver side for proper clearance.
• DO NOT USE FILL PORT FOR FLUID LEVEL ON AN INDEXED TRANSFER CASE. THE FILL PORT WILL BE LOWER THAN OE FILL LEVEL HEIGHT.
• If any maintenance requiring fluid change or refill has or is being done, before reinstalling the transfer case check fluid levels on the bench and fill the transfer case with the manufacturer recommended volume of fluid.