2 Inch Lift Kit | Jeep Cherokee XJ (1984-2001) | Chrysler 8.25 Rear Axle | w/ FOX 2.0 Adventure Series Shocks | Zone Offroad

Configured for the Chrysler 8.25 rear axle (identified by a 3-inch I.D. U-bolt). Includes FOX 2.0 Adventure Series shocks featuring a nitrogen-charged twin-tube design, 10-stage velocity-sensitive valving, dual-welded ends, self-lubricating seals, and a black powder coat finish on a 2-inch diameter steel body.

Overview

This 2-inch lift kit from Zone Offroad is designed for the Jeep Cherokee XJ (1984–2001). The kit includes polyurethane coil spacers, bolt-in bump stop extensions, a rear add-a-leaf kit, new center pins, clamps, and replacement U-bolts to level the stance and provide clearance for larger tires while retaining factory ride quality.

Features

• Front 2-inch polyurethane coil spring spacers raise lift height while retaining factory ride quality
• Front bolt-in bump stop extensions to properly limit suspension up travel
• Rear long add-a-leafs to level the stance and increase lift height
• New center pins, clamps, and replacement U-bolts included for the rear

Specifications

• Front Lift Method: Coil Spacer
• Front Lift Height: 2 inches
• Rear Lift Method: Add-A-Leaf
• Rear Lift Height: 2 inches
• Shocks Included: Depends on selected variant

Installation

• Estimated Installation Time: 4 hours
• Installation Difficulty: Moderate

Important Notes

Check Rear Axle Diameter: The XJ was manufactured with different rear axles. You'll need to identify yours to complete an order. To tell the difference, measure the inner diameter (I.D.) of your rear U-bolts. The Chrysler 8.25 rear axle uses a 3-inch I.D. U-bolt and the Dana 35 rear axle requires a 2-3/4-inch I.D. U-bolt.