6.5 Inch Radius Arm Lift Kit | Ram 2500 (2019-2024) 4WD Diesel | w/ Nitro Series Shocks | Zone Offroad

Configured with Nitro Series gas shocks featuring a nitrogen-charged twin-tube design, 10-stage velocity-sensitive valving, dual-welded ends for increased strength, self-lubricating seals, internal floating piston (IFP), and a black powder coat finish on a 2-inch diameter steel body.

Overview

This 6.5" radius arm lift kit from Zone Offroad is designed for 2019–2024 Ram 2500 4WD diesel models. The kit includes everything needed for a complete front and rear lift, including full-length coil springs, heavy duty radius arms, steering correction components, and rear lift to level the truck's stance. The kit provides clearance for up to 37" tires.

Features

• High strength progressive rate front coil springs for improved ride quality on any terrain
• Heavy duty 1/4" steel, laser cut, internally gusseted radius arms for increased strength, improved ground clearance, and caster correction
• HD track bar relocation bracket to correctly position the front axle under the truck
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front drive-line angles
• Nitro Series gas or FOX Adventure Series IFP gas shocks included (see variant options)
• Provides clearance for up to 37" tires

Specifications

• Front Lift Method: Coil Spring
• Front Lift Height: 6.5"
• Rear Lift Method: Coil Spring
• Rear Lift Height: 4.5"
• Shocks Included: Yes

Installation

• Estimated Installation Time: 7–9 hours
• Installation Difficulty: Difficult
• Tools Required: Standard wrenches

Important Notes

• T-case indexing ring available for 6-bolt or 8-bolt trucks — verify factory configuration prior to ordering.
• Will not fit rear air-ride equipped models.
• Kit designed for diesel models only.
• Does not fit Powerwagon models.
• Does not fit vehicles with a Manual Shift Transfer Case.
• Trucks equipped with a 2-piece rear driveshaft require carrier bearing shim kit D5406 (not included with kit).