BDS 4 Inch Lift Kit w/ 4-Link | Ram 3500 w/ Rear Air Ride (2019-2024) 4WD Gas | FOX 2.0 Performance Series

Configured with FOX 2.0 Performance Series shocks front and rear. FOX 2.0 shocks feature a 2-inch impact extruded aluminum body, internal floating piston (IFP) monotube design, CNC machined 6061-T6 aluminum mounting ends, a massive 5/8-inch hard chrome plated heat-treated alloy steel shaft, race-developed high-flow piston design, application-specific valving to maximize performance, and a long-lasting clear anodized finish.

Overview

Raise your Ram 3500 with factory rear air bag suspension to new heights with this radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37-inch tires. Up front, the kit includes Pro-Ride coil springs, heavy-duty replacement radius arms, a forged drop pitman arm, a track bar bracket for steering correction, sway bar relocation, and brake line brackets. Because the transfer case must be indexed at this lift height to allow use of the factory front driveshaft, an indexing ring and new transmission crossmember are also supplied. In the rear, the kit utilizes a high-strength steel lift block, a heavy-duty air bag spacer, and longer U-bolts. Precision-tuned NX2 Nitro or FOX 2.0 Performance Series nitrogen-charged shocks are included front and rear depending on configuration selected.

Features

• Heavy-duty tubular radius arms improve strength, handling, and caster control
• Front high-strength progressive rate Pro-Ride coil springs for a smooth ride on any terrain
• Front track bar relocation bracket to re-center the front axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and transfer case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 Nitro or FOX 2.0 Performance Series IFP gas shocks for improved ride and off-road performance
• Rear high-strength steel lift block and heavy-duty air bag spacer
• Longer U-bolts included for rear axle

Installation

• Estimated Time: 7–9 hours
• Difficulty: Difficult
• Special Tools Required: Cut-off wheel or equivalent, welding equipment

Important Notes

• Fits OE-equipped air ride systems only.
• Exhaust modification is required to clear the front driveshaft. The vehicle can be driven without a front driveshaft to an exhaust shop.
• Vehicles equipped with a manual transfer case require BDS122422 manual transfer case shifter extension.
• Vehicles equipped with a 2-piece rear drive shaft (carrier bearing) require BDS122406 carrier bearing drop.